Standards Australia logo
Standards Australia E-News February 2011

Recently Published Standards

The following Standards were published recently. Australian Standards are available for purchase from our distributor, SAI Global at www.saiglobal.com/store

Sectors

  • Agriculture, Forestry, Fishing and Food

    AS 5013.14.1
    Method 14.1: Microbiology of food and animal feeding stuffs-General requirements and guidance for microbiological examinations (ISO 7218:2007, MOD)
    AS 6000
    Organic and biodynamic products
    AS 5812
    Manufacturing and marketing of pet food
  • Manufacturing and Processing

    AS/NZS 4364
    Timber-Bond performance of structural adhesives
    AS/NZS 5125.1
    Heat pump water heaters-Performance assessment - Part 1: Air source heat pump water heaters
    AS/NZS 3678
    Structural steel - Hot-rolled plates, floorplates and slabs
    AS/NZS 1748.1
    Timber - Solid - Stress-graded for structural purposes - Part 1: General requirements
    AS/NZS 1748.2
    Timber - Solid - Stress-graded for structural purposes - Part 2: Qualification of grading method
    AS/NZS 4490
    Timber - Solid - Stress-graded for structural purposes - Verification of properties
    AS 5068
    Timber-Finger joints in structural products-Production requirements
    AS 1860.2
    Particleboard flooring - Part 2: Installation
    AS 1141.11.1
    Methods for sampling and testing aggregates - Part 11.1: Particle size and distributon-Sieving method
    AS 2841
    Galvanized steel wire stand
    AS 1674.2
    Safety in welding and allied processes - Part 2: Electrical
    AS 1141.11.1
    Methods for sampling and testing aggregates - Part 11.1: Particle size and distributon-Sieving method
    AS 2841
    Galvanized steel wire stand
    AS/NZS 3678
    Structural steel - Hot-rolled plates, floorplates and slabs
    AS/NZS 1748.1
    Timber - Solid - Stress-graded for structural purposes - Part 1: General requirements
    AS/NZS 1748.2
    Timber - Solid - Stress-graded for structural purposes - Part 2: Qualification of grading method
    AS/NZS 4490
    Timber - Solid - Stress-graded for structural purposes - Verification of properties
    AS/NZS 1328.1
    Glued laminated structural timber - Part 1: Performance requirements and minimum production requirements
    AS/NZS 1859.1
    Reconstituted wood-based panels - Specifications - Part 1: Particleboard
    AS 2550.1
    Cranes, hoists and winches-Safe use - Part 1: General requirements
    AS/NZS 2712
    Solar and heat pump water heaters-Design and construction
    AS/NZS 4234
    Heated water systems-Calculation of energy consumption
    AS/NZS 1254
    PVC-U pipes and fittings for stormwater and surface water application
    AS/NZS 1260
    PVC-U pipes and fittings for drain, waste and vent application
    AS/NZS 2537.1
    Mechanical jointing fittings for use with corsslinked polyethylene (PE-X) for pressure applications - Part 1: Plastics piping systems for hot and cold water installations-Crosslinked polyethylene (PE-X)-General (ISO 15875-1:2003, MOD)
    AS/NZS 2537.2
    Mechanical jointing fittings for use with corsslinked polyethylene (PE-X) for pressure applications - Part 2: Plastics piping systems for hot and cold water installations-Crosslinked polyethylene (PE-X)-Fittings (ISO 15875-3:2003, MOD)
    AS/NZS 2537.3
    Mechanical jointing fittings for use with corsslinked polyethylene (PE-X) for pressure applications - Part 3: Plastics piping systems for hot and cold water installations-Crosslinked polyethylene (PE-X)-Fitness for purpose of the system (ISO 15875-5:2003, MOD)
    AS/NZS 2537.4
    Mechanical jointing fittings for use with corsslinked polyethylene (PE-X) for pressure applications - Part 4: Plastics piping systems for hot and cold water installations-Crosslinked polyethylene (PE-X)-Guidance for the assessment of conformity (ISO/TS 15875-7:2003, MOD)
    AS/NZS 2537.5
    Mechanical jointing fittings for use with corsslinked polyethylene (PE-X) for pressure applications - Part 5: Plastics pipes and fittings-Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels-Metric series-Specifications-Fittings for mechanical jointing (including PE-X/metal transistions) (ISO 14531-3:2006, MOD)
  • Building and Construction

    AS 1603.11
    Automatic fire detection and alarm systems - Part 11: Visual warning devices
    AS 4773.2
    Masonry in small buildings - Part 2: Construction
    AS 2870
    Residential Slabs and Footings
    AS 4825
    Tunnel fire safety
    AS 1720.1
    Timber structures - Part 1: Design methods
    AS 5100.4
    Bridge design - Part 4: Bearing and deck joints
    AS 5100.5
    Bridge design - Part 5: Concrete
    AS 5100.6
    Bridge design - Part 6: Steel and composite construction
    AS 3959
    Construction of buildings in bushfire-prone areas
    AS 1603.17
    Automatic fire detection and alarm systems - Part 17: Warning equipment for people with hearing impairment
    AS/NZS 1170.2
    Structural design actions - Part 2: Wind actions
    AS/NZS 1170.0
    Structural design actions - Part 0: General principles
    AS 6183
    Fire protection equipment-Carbon dioxide extinguishing systems for use on premises-Design and installation (ISO 6183:2009, MOD)
  • Energy

    AS/NZS 5601.1
    Gas installations - Part 1: General installations
    AS/NZS 5601.2
    Gas installations - Part 2: LP Gas installations in caravans and boats for non-propulsive purposes
    AS/NZS 4552.2
    Gas fired water heaters for hot water supply and/or central heating - Part 2: Minimum energy performance standards for gas water heaters
    AS 4558
    Decorative gas log and other fuel effect appliances
    AS 4647
    Diaphragm gas meters
    AS 2658
    LP Gas-Portable and mobile appliances
    AS 4553
    Gas space heating appliances
    AS 4565
    Radiant gas heaters for outdoor and non-residential indoor use
    AS 4555
    Domestic gas refrigerators
    AS 4647
    Diaphragm gas meters
    AS 4617
    Manual shut off gas valves
    AS/NZS 4474.2
    Performance of household electrical appliances-Refrigerating appliances - Part 2: Energy labelling and minimum energy performance standard requirements
    AS/NZS 1158.5
    Lighting for roads and public places - Part 5: Tunnels and underpasses
    AS/NZS 4474.1
    Performance of household electrical appliances-Refrigerating appliances - Part 1: Energy consumption and performance
    AS 4934.2
    Incandescent lamps for general lighting services - Part 2: Minimum Energy Performance Standards (MEPS) requirements
    AS/NZS 4836
    Safe working on or near low-voltage electrical installations and equipment
  • Water and Waste Services

    AS/NZS 3500.1
    Plumbing and drainage - Part 1: Water services
    AS/NZS 3500.2
    Plumbing and drainage - Part 2: Sanitary plumbing and drainage
    AS/NZS 3500.4
    Plumbing and drainage - Part 4: Heated water services
    AS/NZS 2041.2
    Buried corrugated metal structures - Part 2: Installation
  • Transport and Logistics

    AS 5156
    Electronic speed limit signs
  • Health and Community Services

    AS 2896
    Medical gas systems-Installation and testing of non-flammable medical gas pipelines systems
    AS/NZS 3003
    Electrical installations-Patient areas
    AS ISO 27799
    Information security management in health using ISO/IEC 27002
  • Consumer Products, Services and Safety

    HB 93
    Bunk beds for the short-term rental accommodation industry
    AS/NZS ISO 8980.1
    Ophthalmic optics-Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses
    AS/NZS ISO 8980.2
    Ophthalmic optics-Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses
    AS/NZS ISO 8980.3
    Ophthalmic optics-Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods
    AS/NZS ISO 8980.4
    Ophthalmic optics-Uncut finished spectacle lenses - Part 4: Specifications and test methods for anti-reflective coatings
    AS/NZS ISO 8980.5
    Ophthalmic optics-Uncut finished spectacle lenses - Part 5: Minimum requirements for spectacle lens surfaces claimed to be abrasion-resistant
    AS/NZS ISO 16034
    Ophthalmic optics-Specifications for single-vision ready-to-wear near-vision spectacles
    AS/NZS ISO 10322.1
    Ophthalmic optics-Semi-finished spectacle lens blanks - Part 1: Specifications for single-vision and multifocal lens blanks
    AS/NZS ISO 10322.2
    Ophthalmic optics-Semi-finished spectacle lens blanks - Part 1: Specifications for progressive power lens blanks
    AS/NZS ISO 13666
    Ophthalmic optics-Spectacle lenses-Vocabulary
    AS/NZS ISO 14889
    Ophthalmic optics-Spectacle lenses-Fundamental requirements for uncut finished lenses
    AS/NZS ISO 21987
    Ophthalmic optics-Mounted spectacle lenses
    AS/NZS ISO 8624
    Ophthalmic optics-Spectacle frames-Measuring system and terminology
    TR ISO 28980
    Ophthalmic optics-Spectacle lenses-Parameters affecting lens power measurements
  • Communications, Information Technology and E-Commerce Services

    AS/NZS CISPR 11
    Industrial, scientific and medical equipment-Radio-frequency disturbance characteristics-Limits and methods of measurement
    AS/NZS 4365
    Radiocommunications equipment used in the UHF citizen band radio service
    AS/NZS 60950.1
    Information technology equipment-Safety - Part 1: General requirements
    AS 1417.1(Int)
    Receiving antennas for radio and television in the VHF and UHF broadcast bands - Part 1: Design, manufacture and performance of outdoor terrestrial TV antennas
    AS/NZS CISPR 22
    Information technology equipment-Radio disturbance characteristics-Limits and methods of measurement
    AS 2805.3.1
    Electronic funds transfer-Requirements for interfaces - Part 3.1: PIN management and security-General
    AS/NZS 62087.2.2
    Power consumption of audio, video and related equipment - Part 2.2: Minimum energy performance standards (MEPS) and energy rating label requirements for television sets
    HB 5031
    Records classification
    AS 61508.1
    Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 1: General requirements
    AS 61508.2
    Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 2: Requirements for electrical/electronic/programmable electronic safety-related systems
    AS 61508.3
    Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 3: Software requirements
    AS 61508.4
    Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 4: Definitions and abbreviations
    AS 61508.5
    Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 5: Examples of methods for the determination of safety integrity levels
    AS 61508.6
    Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 6: Guildelines on the application of IEC 61508-2 and IEC 61508-3
    AS 61508.7
    Functional safety of electrical/electronic/programmable electronic safety-related systems - Part 7: Overview of techniques and measures
  • Public Safety; Public Administration; Business and Management

    AS/NZS 2416.1
    Water safety signs and beach safety flags - Part 1: Specifications for water safety signs used in workplaces and public areas (ISO 20712-1:2008, MOD)
    AS/NZS 2416.2
    Water safety signs and beach safety flags - Part 2: Specifications for beach safety flags-Colour, shape, meaning and performance (ISO 20712-2:2007, MOD)
    AS/NZS 2416.3
    Water safety signs and beach safety flags - Part 3: Guidance for use
    AS/NZS 4602.1
    High visibility safety garments - Part 1: Garments for high risk applications
    AS/NZS 2416.1
    Water safety signs and beach safety signs - Part 1: Specifications for water safety signs used in workplaces and public areas
    AS/NZS 2416.2
    Water safety signs and beach safety signs - Part 2: Specifications for beach safety flags-Colour, shape, meaning and performance
    AS/NZS 2416.3
    Water safety signs and beach safety signs - Part 3: Guidance for use
    HB 141
    Risk financing guidelines